Got the frame up and bolted to the house. Thanks again Mark & Marlene for taking time out of your weekend to help us build the frame!
After putting on the 3/4" T & G ceiling, we started attaching the Azek fascia board. This step took quite a while to do. Tim ran each fascia board through the table saw at the correct angle so the roof sheeting would sit directly on top it.
Added the sheeting to the roof. The first 7+ inches of roof sheeting is actually a 1x8 of Azek trim. Then the remainder of the roof was cut out of 3/4" plywood. Had to use compound miter angles where each face met. I think this step took us a couple of hours.
Silas making some S’mores over a makeshift campfire.
Terry showed up at just the right time. Those brackets are HEAVY. They got the tar paper on just minutes before it started to rain. We’ll save the Ladder Safety Course for another post.
Almost done -- just need to shingle, caulk, add the moldings and paint!
Finished!
Subscribe by Email
Follow Updates Articles from This Blog via Email
No Comments
Примечание. Отправлять комментарии могут только участники этого блога.